You have no items in your shopping cart.
Details
Palmer PPB20 Pro Press Patch Box 20.
A press patch box is a special audio signal splitter, which is developed for the specific requirements of a press conference. Via separate inputs, you can connect either a microphone or a line signal (mixer output).
Also available as a stereo version (PPB20S)
A high-quality input amplifier with balanced earth-free input allows for a level adjustment over a wide range. 20 transformer-balanced XLR/m jacks with individual driver circuits in pairs are available as outputs for video cameras or other sound recording devices.
The nominal output level is +4 dBu at 600 ohms. In addition, channels 19 and 20 are equipped with TRS phone jacks for balanced or unbalanced signals and with RCA sockets (-10 dBu nominal level).
If more than 20 outputs are required, further PPB20 units can be cascaded via a BUS IN/OUT socket on the rear panel. A 10-fold LED chain and an adjustable headphone amplifier are used for signal monitoring (display range -40 to +10 dB, 0 dB display
corresponds to +4 dBu output).
The PPB20 has a built-in shielded power pack. An additional DC input allows for battery operation or using an emergency power supply. PW4 is a suitable emergency power supply for two PPB20.
Product type: Splitter
Type: Mic & Line Split
Split type: 1 in 20
Channels: 1
Inputs: 1
Input connectors: XLR
Max. input level: Mic: 0 dBu, Line: +20 dB
Adjustable input: Ja
Number of split-outputs per canal: 20
Max. output level: + 20 dB
Output connectors: 6,3 mm Klinke, Cinch, XLR
Adjustable output: No
Transformer isolated outputs: Yes
Controls: Attenuator, Ground-Lift, Input Gain, Mic/Line Schalter, Phones Level
Indicators: Input Level, Power
Operating voltage: 115V/230V)
Width: 480 mm
Width: 19 "
Depth: 200 mm
Height: 135 mm
Height: 3 U
Weight: 9,09 kg
Note: