EML EMT Powered Loudspeaker. Price per unit (dual case included). Sold in pairs. Amp racks and EML EMT Subs available at extra cost.

The EML -EMT is a compact, two way professional sound reinforcement

loudspeaker system.

It is ideally suited to applications requiring a compact loudspeaker

that can also provide high sound pressure levels, extremely low distortion, and uniform

dispersion.

The EML -EMT loudspeaker can provide vocal range reinforcement or act as a small PA system.

It can also be used as a fill or delay loudspeaker in larger indoor or outdoor systems. A full-range

system can be created with the addition of an optional subwoofer.

The EML -EMT is also a very good solution for theatre applications due to its extreme natural

vocal range sound.

The loudspeaker's extended low-frequency headroom delivers a smooth sound over a wide

operating frequency range of 55 Hz to 18 kHz.

The rugged cabinet is coated with a black carpet.

The EML-EMF can be mounted on any speaker stand without extra rigging hardware.

Horizontal or vertical rigging can be achieved with the special EML-EMT rigging beams.

Specifications:

Freq response: 50 Hz - 16 KHz full range mode )

Horizontal Coverage : 60° ( 1 KHz - 16Khz ) (-6dB )

Vertical Coverage : 40° (1 KHz - 16 KHz) (-6dB )

Maximum peak Output : 138 dB

X-over : 1000 Hz

Low Frequency : 

1 x 15 " Neodymium woofer with forced air convection circuit

for low power compression

Power-handling capability: 600 W (AES).

Impedance : 8 Ohm.

High Frequency : 

1 x 2 " compression driver features a composite diaphragm

assembly.

The diaphragm is attached to a 4 "edgewound aluminium ribbon

voice coil mounted on a neodymium magnet

Power-handling capability: 150 W (AES) .

Impedance : 16 Ohm.

Connectors : 2 x Speakon NL8 in parallel

2- Low -

2+ Low +

3- High -

3+ High +

Dimensions ( H x W x D ) (707mm W x 432 mm H x 410mm D)

Net weight 34 Kg

Note: