The Litepanels Low-profile series is a reconfiguration of the Spot, Super-Spot and Flood 1X1s meant to be mounted parallel (horizontally) with the ceiling or wall. Because the individual lenses of the LED array are tilted at 40 degrees off-axis, you don't have to tilt the fixture, making it possible to mount it with only three inches of clearance from the surface. It's ideal for small rooms where floor space or headroom is tight. 

This Litepanels 1X1 Low-Profile LED Daylight Flood Light draws just 40 watts and is driven by the included 100-240 Volt power supply as well as a variety of DC battery sources, such as the Litepanels Backpack PowerCell (1.75 hours power). The 1X1's  LEDs have a 50,000 hour lamp life, making it effectively maintenance-free.  

Among the features that professionals have come to appreciate in the series are the ballast-free design, 0-100% dimming and virtually heat-free operation. Options include DMX modules, slide-in conversion and diffusion filters and a wired remote dimmer (purchased separately).  

Low-profile

The fixture mounts nearly flush with the ceiling or wall with only three inches of clearance from the surface. Because the individual LEDs in the 1X1 are tilted at 40 degrees, no tilting of the fixture is required, allowing you to utilize room space that would have been claimed by light stands or overhead brackets.

Dimming Control

Control knob on rear of unit provides 0-100% dimming, with no color shift.

An optional, remote dimming control is also available.

Soft, Concentrated Quality of Light

The "beam" of the 1x1' measures approximately 50 degrees, making it making it possible to fully illuminate subjects at relatively close distances.

Filters Available

Color Conversion and Diffusion slide-in filters are available separately.

Multi-Voltage Power Supply

Power supply operates with 100-240 AC voltage (plug adapters available separately).

DC Compatible

Uses a wide variety of battery power sources (18-28VDC) including the Litepanels optional Backpack PowerCell.

Virtually Heat-Free

Even at only 3" from the mounted surface, there is no risk of damage from this virtually heat-free fixture.

Note: Professionally maintained and teched prior to shipment.